Let's see how we connect a PC DVDROM into Xbox using all the capabilities. So, the Xbox can read CD-R(W), DVD-R(W), DVD+R(W), original and backups games and homebrew apps.
We will need:
• one DVDROM GDR-8163B
• 4 resistors 1k Ohm 1/4 Watt
• A solder
• The modified firmware
• Some cables
• A hot-melt adhesive and glue gun (recommended).
We need the modified firmware from LG 8050L to modify the GDR-8163B. You can search it with the name 8050L FW Flasher fixed. First we need to make a bootable disk (for PC).
Download DOSflopmaker and create a bootable disk.
Set your 8163b to master and plug it to the secondary IDE Channel. Start your PC from the bootdisk and flash the drive with:
sf8163.exe 8050L.dld 2 /f /c /p /o
If something went wrong and the flash is empty or corrupted you should take a look on the /r option. You can flash your drive back with the same procedure; just use another flash file instead.
After that you open your drive:
And take out the main PCB and you’ll see:
Now solder a resistor on the cables
Now you must solder the resistors like the photos below.See the photos below to view the points.
Up side:
Down side:
A closer look to points:
Α
Β
C
D
E
F
The cable from xbox bust be edited:
The pinout is:
01 GND
02 +12
03 TrayOut
04 TrayIn
05 GND
06 +12V
07 GND
08 +5V
09 Data
10 CD-RDY
11 Eject 12 +5V
Now you must connect the
+5V to 08,
+12V tp 02,
GND and GND to 01, 07, or 05.
Now to enable the eject button, you must connect the ADEF points. The correct connections is:
A to 11
D to 10
E to 04
F to 03
The mod is ready.Now close the DVD ROM. You can solder the Xbox's Drive Cover to your new DVD ROM.
Read more
Published on
Read more
Published on
Read more
Published on
Read more
Published on