How To Fix a Dead Acer Aspire One

How To Fix a Dead Acer Aspire One
Written by Admin

I was happy with ΑΑ1, as i used it mainly to watch movies on TV, until one day it was dead, no POST, only black screen.

Before starting to look for the files, to send it back, i searched online and i found out that this problem is something standard for ΑΑ1s. The problem has to do with its BIOS, but the good thing is that AA1 can boot up from a USB Flash, even with that problem.

So, if you got the same problem, try this:
-Take a USB flash drive and using another PC, format it as FAT ONLY. For best results, use UNetbootin, according to below settings:

![](https://en.homebrewgr.info/bl-content/uploads/pages/ac487f9455c5c751d0a622960f21a86e/aa1_3-300x198.png)

If AA1 don't boot up after flashing the USB flash with UNetbootin, try using Window's DISKPART instead. Go to Start -> Run and type CMD. In Command window, write DISKPART. Then put the commands below (as "Disk 6", put your USB flash's letter):

![](https://en.homebrewgr.info/bl-content/uploads/pages/ac487f9455c5c751d0a622960f21a86e/aa1_2.png)

When done, press ASSIGN and then EXIT.

Now download the latest firmware from here (v3309) and unzip it. Copy FLASHIT.EXE and BIOS files inside the USB flash and rename the BIOS file as ZG5IA32.FD (important).

-Close the ΑΑ1 and insert its power cord. Now insert the USB flash on the left USB port and press (and keep pressing) the FN + ESC buttons. Now press POWER. You will see the POWER led to start blinking. Press the POWER button again (once) and wait for about 3 minutes.

-ΑΑ1 will RESET itself and boot up again and this time is fully working. Your AA1 is back.

![](https://en.homebrewgr.info/bl-content/uploads/pages/ac487f9455c5c751d0a622960f21a86e/dsc008081.jpg)

About the author

Admin

Admin

Welcome to my blog. My name is Akis Mparekas. I am a freelance web developer from Greece and I have been involved in SEO, Website Migration (transferring content from a site, eg blogger to WordPress), website optimization, and web scraping (extracting content from one or more sites) for years.

At the same time I am taking my first steps in game development (unity) and animation (blender). I also create cool stuff, either for work or for fun. When I have time, I write tutorials and I blog.

Leave a Comment